Changing impeller of sea water pump Changing impeller Figs. 1 and 2 Replace worn or damaged impeller together with wearing plate and seal (repair kit). To do so, unscrew the lid. 1 Fig. 2 Unscrew oval-head bolt between intake and pres- sure pipes of the seawater pump. This bolt holds the eccentric (see also Fig. 5, page 62). 2 Fig. 3 Pull out impeller together with the cam, using a suitable extracto (available from the manufacturer of the seawater pump). 3 Fig. 4 If no extractor is available, pull out impeller toge- ther with the eccentric, using a pair of pliers. 4 61