MAN — Removing and installing turbocharger

Removing and installing turbocharger Fig. 5 Remove the four (self-locking) nuts from the turbo- charger flange. Take off turbocharger. Note: When placing the turbocharger to one side, ensure extreme cleanliness to pre- vent penetration of dirt and foreign bodies. 5 Installing turbocharger Fig. 6 The turbocharger is fitted in reverse order. On assembly, new seals and new self-locking nuts are to be used. Before connecting the oil supply line, fill the bea- ring housing with fresh engine oil. Check all the connections for leaks and to ensure they are not subjected to strain. Caution: Comply with instructions for masking unions on pressurised oil and fuel pipes (see page 3). 6 85