Removing and installing cylinder head Removing the cylinder head D Draining off coolant, see page 43 D Remove expansion tank, see page 47 D Remove heat exchanger, see page 57 D Remove intercooler, see page 88 D Remove liquid-cooled exhaust manifold, see page 79 D Remove injection nozzles, see page 32 Fig. 1 Detach fuel leak-off oil line. Remove the coolant bleed pipe. Remove the cylinder head covers. 1 Fig. 2 Back off the valve adjusting screws. Release and remove the cylinder head bolts in re- verse order of tightening. Note: Use a reinforced screwdriving machine to loosen and tighten the cylinder-head bolts. 2 Fig. 3 Remove the rocker arm bearing housing. 3 Fig. 4 Remove the valve bridges.
Take out the push rods. 4 91