honda — Service Information

BF40AoBF50A Engine Does Not Run Smoothly ~ Faulty Automatic SE (Starting Enrichment) valve. Inspect: P. 5-18 and 19 Engine starts, but stalls soon. Idle speed is not stable or stalls. Spark plug faulty. Clean and adjust or replace (see base shop manual). + Carburetor pilot screw and/or throttle stop screw misadjusted. Adjust (see base shop manual). --+ Overflowed carburetor. Drain the carburetor and prime again. If still not good, check the carburetor float valve. Retighten the carburetor mounting bolts or intake manifold bolts, if they are loose. Make sure the carburetor and insulator are installed correct- ly. Replace the gaskets if they are damaged.

and intake manifold mounting bolts, and/or damaged carbure- tor insulator and gasket. Valve clearance misadjusted. Adjust (see base shop manual). Low cylinder compression. Check for defective cylinder head gasket, valves or valve seats. Check that the cylinder head bolts are correctly tightened. Check for worn piston, piston rings or cylinder. 2-5