3. DASHPOT DIAPHRAGM Adjust the dashpot diaphragm after adjusting the idle speed (see base shop manual). 1) Remove the engine cover. 2) Remove the throttle rod from the throttle cam. 121 THROTTLE ROD 3) Loosen the 6 x 16 mm torx bolts using a commercial- ly available torx bit (T30H). 11 1 TORX BIT T30H (Commercially available) 4) Disconnect the vacuum tube from the dashpot check valve. I [I] VACUUM TUBE PI DASHPOT CHECK VALVE 5) Move the throttle cam in the direction pointed by arrow until the throttle cam roller is set free from the throttle cam and hold the throttle cam. CAM ROLLER 3-4