honda — Fuel System

BF40AoBF50A FLOAT PIN INSTALLATION 11 1 KNURLED SECTION 1) Set the float onto the float tab, then set them on the carburetor body. 2) Install the float pin using the 2.0 mm commercially available pin driver. Install the float pin by lightly tapping the pin at the knurled section side of the float pin. 2.0 mm PIN DRIVER (Commercially available) SE THERMAL VALVE INSTALLATION [l] SE THERMAL VALVE 1) Install a new O-ring to the SE thermal valve. 2) Install the SE thermal valve with the set plate and loosely install the screw. 3) Set the SE thermal valve as shown noting the direc- tion and tighten the screw securely. EW [4] INTAKE kE THERMAL MANIFOLD SIDE VALVE 5-1 7