c. ASSEMBLY Assembly is the reverse order of disassembly. INDICATOR Install the indicator noting the direction. IGNITION SWITCH, EMERGENCY STOP SWITCH Install the switch by aligning the cutout of the switch with the flat section of the installation hole as shown. Tighten the lock nut to the specified torque. Torque: Ignition switch lock nut: 7 N*m (0.7 kgfom, 5.1 Ibf*ft) 16 mm lock nut: 1.5 N*m (0.15 kgf*m, 1.1 Ibfuft) [l] CUTOUT 121 IGNITION SWITCH FLAT SECTION t41 IGNITION SWITCH LOCK NUT I 7 N*m (0.7 kgf*rn, 5.1 Ibfoft) I / [6] 16 mm LOCK NUT CUTOUT 1.3 N*m [31 FLAT SECTION PI EMERGENCY Y STOP SWITCH 15-1 0