BF40AoBFSOA Faulty Power TriMilt Assemblv Quick Reference Chart Check point See page 2-7 Ioes no tilt up Checkhepair method blow pressure low or drops 0 ~. SYr Does no tilt down tom Does not hold Pre Lower chamber u r e Upper chamber blow pressure low or drops 2ontractec side - __ 0 Extended side - ~ 0 0 Motor Check the motor. 0 0 0 0 @ Manual valvc Check the manual valve for tight- ening, damage or foreign material. Check the O-ring for damage, replace if necessary.Replace the manual valve if necessary. 0 0 0 @ Free piton, O-ring ~ 0 0 0 Check the O-ring for damage, replace if necessary. 0 0 0 @ Piston rod, O-ring, oil seal Check the O-ring, oil seal for dam- age, replace if necessary.
Replace the piston rod assembly if neces- saw. 0 0 0 @ Oil (ATF) Check the oil level and add if nec- essarv. 0 0 8 Upper cham. ber check valve ~ 0 0 0 Check the check valve for dam- age, wear or foreign material. Clean and reassemble the upper chamber check valve DroDerlv. 0 ~ 0 ~ 0 ~ 0 0 0 0 Spool valve (with built-in upper relief valve) Check the valve for damage, wear or foreign material.Clean and reassemble the spool valve prop- erly.Do not disassemble the spool valve, either as the upper relief valve is built in the SDOO~ valve. ~ 0 0 0 0 Check the check valve for dam- age, wear or foreign material. Clean and reassemble the lower chamber check valve properly.
0 0 0 8 Gear pump ReDlace the aear DumD assemblv. 0 0 @I Down relief valve Check the valve for damage, wear or foreign material.Clean and reassemble the down relief valve DroDerlv. 0 0 @I Thermal valve (in the manual valve' @ Lower cham- ber check valve ~ 0 Check the check valve for dam- age, wear or foreign material. Clean and reassemble the manual valve properly. 0 0 @ Shock relief valve (in the piston) Check the relief valve for damage, wear or foreign material. Replace the piston assembly if necessary. Clean and reassemble the piston DroDerlv. 0 0 0 Lower cham- ber safety valve (with built-in the valve body) Check the lower chamber safety valve for damage, wear or foreign material.
Replace the valve body assembly, if necessary. Clean the valve body and reassemble prop- erly. 0 0 @ Upper cham- ber safety valve Check the upper chamber safety valve for damage, wear or foreign material. Replace the upper cham- ber safety valve if necessary. Clean and reassemble the upper chamber safety valve properly. 0 0 0 2-way valve Check the 2-way valve for dam- age, wear or foreign material. Replace the 2-way valve if neces- sary. Clean and reassemble the 2- wav valve properly. 2-6