Caterpillar — Caterpillar 10-140 Construction Equipment Maintenance Manual

109 Maintenance Section Lubricant Viscosities and Refill Capacities SEBU7645-06 Lubricant Viscosities and Refill Capacities 102975262 Lubricant Viscosities SMCS Code: 7581 The proper oil viscosity grade is determined by the minimum outside temperature when the machine is started. The proper oil viscosity grade is also determined by the maximum outside temperature while the machine is operated. Use the column that is called “Min” on the table to determine the oil viscosity grade that is required for starting a cold machine and for operating a cold machine.

Use the column that is called “Max” on the table to select the oil viscosity grade for operating the machine at the highest temperature that is anticipated. Use the oil that has the highest viscosity for the ambient temperature when you start the machine. Machines that are continuously operated should use oils that have a higher viscosity in the final drives and differentials in order to maintain the highest possible oil film thickness. Consult your dealer if additional information is needed. Note: When operating in conditions below -20 °C (-4 °F), refer to Special Publication, SEBU5898, “Cold Weather Recommendations’ for information.

Table 55 Lubricant Viscosities for Ambient Temperatures °c Compartment or System | Oil Type and Classification Cat DEO Multigrade Engine Crankcase for all Machines(02 c aoe Soe SYNO at Cat ArcticECF-14 API CG-4 Multigrade® Oil Viscosities oF Min Max Min Max SAE OW-20 -40 10 ~40 50 SAE OW-30 -40 30 -40 86 SAE OW-40 -40 40 ~40 104 SAE 5W-30 30 SAE 5W-40 -30 30 50 ~22 -22 86 122 SAE 10W-300 -18 40 0 104 SAE 10W-40 -18 50 0 122 SAE 15WW-40 -9.5 50 15 422 (continued)