Caterpillar — Caterpillar 10-140 Construction Equipment Maintenance Manual

150 Maintenance Section Seat Belt - Replace SEBU7645-06 inspect the seat belt (3) for webbing that is worn or frayed. Replace the seat belt if the seat belt is worn or frayed. Consult your Caterpillar dealer for the replacement of the seat belt and the mounting hardware. 103589859 Steering Column Play - Check SMCS Code: 4310-535; 4338-535 Note: Within three years of the date of installation or within five years of the date of manufacture, replace the seat belt. Repiace the seat belt at the date which occurs first. A date label for determining the age of the seat belt is attached to the seat belt, the seat belt buckle, and the seat belt retractor.

If your machine is equipped with a seat belt extension, also perform this inspection procedure for the seat belt extension. 102429594 Seat Belt - Replace SMCS Code: 7327-510 Within three years of the date of installation or within five years of the date of manufacture, replace the seat belt . Replace the seat belt at the date which occurs first. A date label for determining the age of the seat belt is attached to the seat belt, the seat belt 901408466 Illustration 205 1. Hold the steering wheel with both hands. buckle, and the seat belt retractor. 1 2. Try to move the steering wheel from one side to the other side.

The maximum allowed movement 2 in the steering column should not exceed 25 mm £6 ) (1.0 inch). If the value is not within the limit, perform the following steps: (OWE J> ioe a. Inspect the pivot joint for loose bolts. b. Tighten the bolts if the bolts are loose. Note: Apply 9S-3263 Thread Lock Compound to the bolts before tightening. IWustration 204 g01152685 (1) Date of installation (retractor) (2) Date of installation (buckle) (3) Date of manufacture (tag) (fully extended web) (4) Date of manufacture (underside) (buckle) Consult your Caterpillar dealer for the replacement the seat belt and the mounting hardware.

If your machine is equipped with a seat belt extension, also perform this replacement procedure for the seat belt extension. c. Inspect the pivot joint for excessive wear. d. Replace the bushings if there is excessive wear. Failure to perform this inspection and repair may cause loss of steering control, which may result in personal injury or death. Do not operate the machine until the inspection and repair are completed. Contact your Caterpillar dealer for any other required service.