34 SEBU7645-06 Product Information Section General Information Table 13 IT28G Bucket Part Ground ‘Engaging Number RATED Rated Volume Tools Bolt-on Cutting BUCKET LOAD Rated Operating | Dump Clearance Load 2.0 m? (2.6 yd’) 3477 kg (7667 Ib) Edge 132-2258 2911 (B) mm (9 ft 7 inches) Teeth 1.9 m? (2.5 yd’) 3521 kg (7764 ib) 2979 mm (9 ft 9 inches) Teeth and 2.0 m? (2.6 yd’) 3440 kg (7584 Ib) Segments Bolt-on Cutting 132-2256 Teeth 2911 mm (9 ft 7 inches) 1.8 m?
(2.35 yd*) | 3518 kg (7756 lb) Edge 2967 mm (9 ft 9 inches) 1.7 m® (2.25 yd*) | 3558 kg (7845 Ib) Reach (A) 3036 mm 1014 mm (3 ft 4 inches) 981 mm (3 ft 3 inches) 1014 mm (3 ft 4 inches) 958 mm (3 ft 2 inches) 924 mm (3 ft) (9 ft 11 inches) Teeth and Segments 1.8 m? (2.35 yd*) | 3466 kg (7643 Ib) 2967 mm (9 ft 9 inches) 958 mm (3 ft 2 inches) Flush Mounted Teeth 1.7 m® (2.25 yd*) | 3575 kg (7883 Ib) 3035 mm (9 ft 11 inches) 923 mm (3 ft) (1) Rated loads are based upon a standard machine with the following conditions:
Implements, Full fuel tank, ROPS operator, 20.5-25 12 PR L2 or equivalent tires, and Counterweight Cab, 80 kg (176 Ib ) 4E-2473 930G Rated loads are based upon a standard machine with the following conditions: « Implements ¢ Full fuel tank ¢ ROPS Cab * 80 kg (176 lb ) operator « 600/65 R25 L3 or equivalent tires « Optional Counterweight « Limited Slip e HD Rear Axle ¢ Guards e Blue Angel Rated loads conform to the SAE standard “J732”. Note: Long tooth options do not conform to the SAE standard “J732”. Rated loads will vary with different work tools. Contact your Caterpillar dealer regarding the rated load for your specific machine configuration.