Caterpillar — Caterpillar 10-140 Construction Equipment Maintenance Manual

36 SEBU7645-06 Product Information Section General Information Table 15 930G Bucket Part Number RATED Ground Engaging Tools BUCKET LOAD Rated Volume Rated Operating Dump Clearance Load {A} 4397 kg (9694 Ib) 3027 mm (119 inches) 966 mm (38.0 inches) 2.0 m? (2.6 yd’) 4366 kg (9625 Ib) 3093 mm (122 inches) 927 mm (36.5 inches) Teeth and Segments | 2.1 m* (2.75 yd’) 4313 kg (9509 Ib) 3027 mm (119 inches) 966 mm (38.0 inches) Boit-on Cutting Edge | 2.3 m* (3.0 yd’) 4370 kg (9634 Ib) 2992 mm (118 inches) 1007 mm (39.6 inches) 2.1 m° (2.75 yd?) 4339 kg (9566 Ib) 3057 mm (120 inches) 968 mm (38.1 inches) Teeth and Segments | 2.3 m?

(3.0 yd?) 4285 kg (9447 Ib) 2992 mm (118 inches) 1007 mm (39.6 inches) Bolt-on Cutting Edge | 2.3 m® (3.0 yd’) 4264 kg (9401 Ib) 2917 mm (115 inches) 925 mm (36.4 inches) 2.1 m? (2.75 yd?) 4233 kg (9332 Ib) 2985 mm (118 inches) 892 mm (35.1 Inches) Teeth and Segments | 2.3 m* (3.0 yd’) 4180 kg (9215 ib) 2917 mm (115 inches) 925 mm (36.4 inches) Bolt-on Cuiting Edge | 2.1 m® (2.75 yd’) 252-6909 239-7004 256-8898 251-6600 Teeth Teeth Teeth Flat Mounted Teeth Bolt-on Cutting Edge | 256-8914 Teeth 2.4 m? (3.1 yd’) 2.5 m® (3.3 yd’) 2.3 m° (3.0 yd?) Teeth and Segments | 244-3674 (pin coupler) Ejector with Bolt-on Cutting Edge 2.5 m?

(3.3 yd’) 3.1 m® (4.1 yd’) 4278 kg 2999 (9431 Ib) (118 inches) 4219 kg 2871 (9301 Ib) (113 inches) Reach (B) mm 878 mm (34.6 inches) mm 971 mm (38.2 inches) 4188 kg 2939 mm 938 mm (9233 Ib) (116 inches) (36.9 inches) 4135 kg 2871 mm 971 mm (9116 Ib) (113 inches) (38.2 inches) 3939 kg (8684 Ib) 2738 mm (116 inches) 980 mm (38.6 inches) () Rated loads are based upon a standard machine with the following conditions:

Implements, Full fuel tank, ROPS Cab, 80 kg (176 Ib ) operator, 600/65 R25 L3 or equivalent tires, Optional Counterweight, Limited Slip, HD Rear Axle, Guards, and Blue Angel Table 16 930G Bucket Part Number 251-9880 (quick RATED Ground Engaging Tools LOAD (PENETRATION Rated Volume Flush Mounted Teeth | 2.3 m® (3.0 yd’) coupier) 251 - 9879 (pin coupler) () Flush Mounted Teeth | 2.3 m* (3.0 yd’) BUCKET) Rated Operating Load 4084 kg Dump Clearance (A) 2983 Reach (B) mm 984 mm (9004 ib) (114 inches) (38.7 inches) 4297 kg (9473 Ib) 2999 mm (118 inches) 878 mm (34.6 inches) Full fuel tank, ROPS Cab, 80 kg (176 ib ) Rated loads are based upon a standard machine with the following conditions:

Implements, operator, 600/65 R25 L3 or equivalent tires, Optional Counterweight, Limited Slip, HD Rear Axle, Guards, and Blue Angel