Caterpillar — Caterpillar 10-140 Construction Equipment Maintenance Manual

45 Product Information Section General Information SEBU7645-06 Rated Load for Material Handling Arm Failure to comply to the rated load can cause possible personal injury or property damage. Review the rated load of a particular work tool before per- forming any operation. Make adjustments to the rated load as necessary for non-standard configurations. Note: Rated loads should be used as a guide. The operator must be aware of the following conditions:

« Work tools « Uneven ground ¢ Soft ground « Other poor ground conditions The rated operating load is defined by the least amount of weight of the minimum lift capacity, minimum tilt capacity, and 50 percent of the full turn static tipping load. The placement height (ground line to the chain hook) and reach (front tire to the chain hook) are given for the highest position of the material handling arm and for the lowest position of the material handling arm. Rated loads will vary with different work tools. Contact your Caterpillar dealer regarding the rated load for your specific machine configuration. litustration 18 g00628217 Position (A) represents the retracted position.

Position (B) represents the mid-position. Position (C) represents the extended position. 924G Rated loads will vary with different work tools. Contact your Caterpillar dealer regarding the rated load for your specific machine configuration.