11. EXPLANATION OF COMPONENTS 5. ATTACHMENT CONTROL PEDAL When breaker is installed When the front of the pedal is depressed, the breaker is actuated. The positions of the lock pin are as follows: a lock, b pedal half stroke position, c pedal full stroke position Set the working mode to the breaker mode and set the lock pin to position c . When general attachment is installed When the front of the pedal is depressed, the attachment is actu- ated. The positions of the lock pin are as follows: a lock, b pedal half stroke position, c pedal full stroke position PC450-ENG 2-22 WARNING Do not put your foot on the pedal except when operating the pedal.
If resting your foot on the pedal during operation, and it is depressed by accident by accident, the attachment may move suddenly and cause serious damage or injury.