PUMP DRIVE REF PART NO. NUMBER OTY DESCRIPTION REMARKS 166-060 PUMP DRIVE INCL. REF. NO.'S 1,2 & 1. 105-542 2 DOWEL PIN (1/4' X 1-1/4") 2. 105-873 15 FLANGE LOCK BOLT 5 THRU 20 3. 106-124 2 BOLT (M10-1.5 X 110mm) 105-022 2 BOLT (3/8-NC X 4") 8020 ONLY 4. 106-164 8 FLANGE BOLT (M10-1.5 X 30mm) 105-826 8 FLANGE LOCKBOLT 8020 ONLY 5. 110-491 2 CLAMP 6. 115-165 1 PIPE PLUG 7. 115-211 1 PIPE PLUG 8. 116-166 AR TUBING USE 4.5" 9. 125-040 8 BEARING 10. 155-158 1 SLIP ON COUPLER SEE FOOTNOTE 2 11. 155-252 1 VENT TEE 12. 157-552 1 INTERNAL SEAL 13. 159-003 1 VENT PLUG SEE FOOTNOTE 1 14. 165-111 1 GEAR 15. 165-110 1 GEAR 16. 165-109 1 GEAR 17. 167-145 1 INPUT PINION SHAFT 18.
169-022 1 PUMP HOUSING 19. 169-023 1 PUMP COVER 20. 115-157 1 PIPE PLUG 21. 274-178 1 OIL LEVEL DECAL 22. 156-241 1 STREET ELBOW SEE FOOTNOTE 1 NOT SHOWN: 256-603 AR BLACK SILICONE FOOTNOTES 1. -STREET ELBOW (REF. NO. 22) WAS USED IN EARLY STYLE MOUNTING OF VENT PLUG ( 4 159-003) ON 5020 ONLY. 2. -EARLY STYLE USED AN ADDITIONAL COUPLER (REF. NO. 10) AND SERVICE TEE (*156 - 237) FOR VENT PLUG (*159-003) INSTEAD OF (REF. NO.11). 101 801-084