BOLT AND NUT TORQUE SAE G R-5 BOLTS (FINE OR COARSE THREAD) Bolt and Nut Details 1/4 5/16 3/8 7/16 Diameter 1/2 9/16 (In Inches) 5/8 3/4 7/8 I 1.1/8 1.1/4 Regular hex nuts or regular hex bolt heads torqued into regular nuts. flange nuts. or drilled and tapped holes 12 25 40 65 FT. LBS. 100 150 TORQUE) 200 350 560 840 1030 1460 Her section top deflected locknuts 8 15 25 40 60 90 120 210 340 500 620 880 Flanged section with flange teeth nuts'. or flange teeth bolt heads' torqued into flange nuts or drilled and tapped holes.
20 45 75 125 190 270 370 650 1050 1580 1950 2760 SAE GR-8 BOLTS (FINE OR COARSE THREAD) Bolt and Nut Details 1/4 5/16 3/8 7/16 Diameter 1/2 9/16 (In Inches) 5/8 3/4 7/8 1 1.1/8 1.1/4 Grade C" regular nex nuts" or regular hex bolt heads torqued into grade "C" regular nuts". flange nuts. or drilled and tapped holes. 14 30 55 85 (FT. LBS. 130 190 TORQUE) 260 450 730 1090 1550 2180 Grade C . ' hex section top deflected locknuts** 10 18 35 50 80 110 160 270 440 650 930 1310 Flanged section with flange teeth nuts" or flange teeth bolt heads• torqued into flange nuts or drilled and tapped holes. 24 50 90 140 220 310 430 750 1210 1820 2580 3640 NOTES:
* For flange sections without flange teeth use values for regular nuts and bolt heads. **For nuts that are not Grade "C" use values for grade 5. 131