Komatsu — CHECK BEFORE STARTING ENGINE, ADJUST

. OPERATION OPERATION OPERATION CHECK BEFORE STARTING ENGINE, ADJUST WARNING engine the engine or coolant leakage from the cooling system. If any problem is 6. Check for damage to handrail, loose bolts Repair any damage and tighten any loose bolts. 3 - 94 WALK-AROUND CHECK Before starting the engine, walk ar ound the machine and look at the underside of cha ssis for anything unusual like loose bolts and nuts, leakage of f hydraulic system. uel, oil and coolant. Also check the condition of the work equipment and the and collection of dust at places that reach high temperature.

the Also check for loose wiring, play, and collection of dust at places that reach high tem Leakage of oil or fuel, or accumula tion of flammable material around high temperature part s, such as the engine muffle r or turbocharger, may cause fire. Check carefully, and if any abnorma lity is found, repair it or contact your Komatsu distributor. lity is found, repair it or contact your Komatsu distributo Do not get on or off the machine fro m the rear. Using this position is dangerous because it is easy to slip and y ou canno t be seen from the operator's compartm ent. Always use the handrail and step at the side when ge tting on or off the machine.

If the machine is at an angle, mak e it level before checking. round the machine and under the machine to check for loose nut or bolts, or Before starting the engine, look a bolts leakage of oil, fuel, or coolant, and check the condition of the work equipment and hydr aulic system. Chec k also for loose wiring, play, and collection o f dust at places which reach high temperatures. section before starting the engine each day. Always carry out the items in this 1. Check for damage, wear, play in work equipment, cylinders, linkage, hoses Check that there are no cracks, ex cessive wear, or play in the work equipment, cylind ers, linkage, or h oses. If any abnormality is found, repair it. 2.

Remove dirt and dust from aro und engine, battery radiator. Check if there is any dirt or dust a ccumulated around the engine or radiator. Check a lso if there is an y flammable material (dead leaves, twigs, gras s, etc.) accumulated around the battery or high tem perature engine parts, s uch a s the engine muffler or turbochar ger. Remove all such dirt or flammable material. 3. Check for leakage of water or Check that there is no oil leakage found, repair it. 4. Check for oil leakage from po wer train case, final drive case, hydraulic tank, hose Check that there is no oil leakage. If any problem is found, repair the place where the Check for leakage of oil from the u ndercover.

Check the ground for traces of oil leaka 5. Check of the undercarriage pa Check track shoe, sprocket, id Repair them if any trouble is fo 5. Check of the undercarriage pa ler, guard for damage, wear, loose bolts, or leakag e of oil from rollers, If any damage, wear, or oil leakag e is found, repair the problem and tighten the bolts.