. OPERATION OPERATION ADJUST MIRROR WARNING ADJUST JOYSTICK (PCCS LEVER) WARNING the (1) REMARK PCCS: Palm command control system 3 - 113 Be sure to adjust the mir rors before starting work. If they are not adjusted properly, you cannot s ecure the visibility and m ay be injured or may injure so Loosen nut (1) of the mirror and adjust the mirro where it gives the bes t view from the operator's sea In particular, be sure t o adjust the mirror so that peo ple at the left or right of the mac hine can be seen clearly.
After moving case (2) in order to adjust the position of the steering, directional, and gearshift lev er, secure lock lever (1) in to the notched hole, making su re it is in the LOCK position. If it is not completely locked, the steering, directional, and gearshif t lever may unexpectedly move and cause damage, serious injur y, or deat h. The steering, direction al, and speed lever (wrist cont rol type s ingle l ever : joystick) can b e adjusted up to 90 mm (3.5 in) in 9 stages to the fr ont or rear. Adjust to the most suitable p ositio n to match the adjus tment of the operator's seat. 1.
Pull up lock lever (1) to the FREE position at the rear of case (2) on left side of the operator's compartment. 1. Pull up lock lever (1) to the FREE position at th e rear of 2. With lock lever (1 front of case (2), t hands. The joystic ) pulled up, use your other ha nd to gri p hen move it forward with you k moves with case (2). the desired position until a 3. Move case (2) to Then pull up loc automatically retu k lever (1) and release it. L rns to the LOCK position.