Komatsu — MACHINE MONITOR

. OPERATION EXPLANATION OF COMPONENTS GAUGES AND METER ENGINE COOLANT TEMPERATURE GAUGE should be in the green range. If the indicator enters the red range during operations, the overheat prevention system is actuated. (A) - (B): Red range (A) - (C): Green range (C) - (D): White range (1) the (A) - (B): Indicates red range (A) - (C): Indicates green range 3 - 18 This met During n er (8) shows the en ormal operations, gine coolan the indicato The over heat prevention sy stem is actuated as follows. Red range (A) position: Eng ine coolant tempe onitor sho ws abnormality disp Red range (B) position:

Eng ine speed ine coolant chang eng sho sou The overheat prevention tempe ws abnormality dis nds at same indicator enters the green r ow idling, onitor (1) buzzer FUEL GA UGE itor (9) shows the amount of fuel remaining in the fuel ator should be in the green range during operations. cator enters the red range (A) during operation, carry out This mon tank. The indic If the indi The corr ect fuel level may n ot be displayed for a short time when the starti ng switch is turned ON, but this is not an abnormality .