EXPLANATION OF COMPONENTS OPERATION B: CAUTION ITEMS If the caution monitor lamp flashes, repair the problem as soon as possible. 1. CHARGE LEVEL This monitor indicates an abnormality in the charging system while the engine is running. If the monitor lamp flashes, check the V-belt tension. If any abnormality is found, see “OTHER TROUBLE” on page 159. REMARK While the starting switch is ON, the lamp will remain lit and will go off once the engine is started. 2. FUEL LEVEL If the fuel drops below 55 liters, the lamp will flash. Top up the fuel before this. 3. AIR CLEANER CLOGGING This warns that the air cleaner is clogged.
If the monitor lamp flashes, stop the engine then inspect and clean the air cleaner. 4. OVERLOAD CAUTION (When in LO mode) This warns that the machine is close to tipping due to the load (an audible warning is also given), if the warning is given lower the load. Refer to the lifting capacity chart for safe load.(see section 10) 62 CAUTION CAUTION