Emergency repairs All cabs are equipped with two speaker enclosures, complete with all neces- sary wiring, at either side of the cab. Before attempting to fit any speakers, ensure that the following information is observed: Ensure that the impedance and the power handling capacity of each speaker is suitable for the audio component application; refer to the manufacturers technical literature. To maintain maximum sound qual- ity, it is important that the speaker cables are correctly connected to the corresponding positive (+) and negative (-) speaker terminals; incorrect connection will result in poor sound quality.
Speakers To ensure safe electrical connections and also to prevent irreparable damage to any audio equipment being fitted, it is essential that the following recommen- dations are observed: 1. Before attempting to fit any audio equipment it is essential that the electrical connectors on the rear of the audio equipment are correctly identified in accordance with the audio manufacturers instructions. 2. The color coded connectors con- tained in the radio aperture provide the following functions: Brown (A):speakers Grey (B): Power supply Connect the DIN connectors to the cor- responding connectors on the rear of the audio equipment. Electrical Connections – 102 – NOTE:
All vehicles are fitted with a roof mounted antenna and a fully shielded extension lead. NOTE: The radio power supply is controlled by the ignition switch. B