Vehicle Identification Consumer Information and Vehicle Identification The NHTSA regulations require a label certifying compliance with Federal Safety Standard, for United States and U.S. Territories, be affixed to each motor vehicle and prescribe where such label may be located. This certifi- cation label, which indicates the date of manufacture and other pertinent infor- mation, is located on the driver's side door frame. Federal Safety Standard Certification Label Check the manufacturer's product infor- mation for the tires and rims actually on each axle to obtain recommended tire inflation pressure for specific applica- tions. The Noise Emission Label is on the driver’s door frame.
It contains informa- tion regarding U.S. noise emission reg- ulations and date of manufacture. The Paint Data Label contains the paint colors used by the factory to paint your vehicle. It lists frame, wheels, cab inte- rior and exterior colors. This label is located on the back of the glove box compartment visible from the passen- ger seat. Noise Emission Label Paint Data Label – 110 – NOTE: GVW is the TOTAL SCALE WEIGHT the vehicle is designed to carr y. T his includes the weight of the empty vehicle, loading plat- form, occupants, fuel, and any load.
The tire size and rim size (and the cold inflation pressure to match that combi- nation) listed under “Suitable Tire-Rim Choice” on the Certification Label are only representative examples for the specified axle ratings. These compo- nents may not be the ones actually installed on the axle, because there are many other appropriate combinations. The “PSI Cold” inflation pressure on the Certification Label is for the tire-rim combination in the example, and may not be the same as the recommended inflation pressure for the actual tires on that axle.