Cab Getting to Know Your Vehicle Check the seat belt locking action by rapidly pulling the belt webbing out of its retracting unit; the belt webbing must lock, i.e. it must not be pulled out of the retracting unit. Do not clean the belts with aggres- sive cleaning agents; if necessary, use an all-purpose cleaner. The seat belt upper anchorage point should be adjusted so that the belt web- bing crosses midway between the user’s neck and the edge of the shoulder . To adjust the position of the upper anchorage point, depress the locking button and, simultaneously, slide the anchorage point to the desired position; release the locking button when the required position is obtained.
Seat belt care Regularly inspect all seat belt web- bing, anchorage points, and locking mechanisms for correct operation and for evidence of excessive wear or damage. Seat belt upper anchorage adjust- ment Before securing a seat belt, ensure that the webbing is not twisted, looped or obstructed in any way that could impair the operating mechanism. Optimal safety can be offered by a seat belt only when it is properly tightened. Never have repairs or modifications made to the seat belts. Replace the seat belt when the webbing is worn or damaged.
If the seat belts have been sub- jected to high loading during a colli- sion, then the complete assembly must be replaced, even if there is no visible evidence of damage.