Instruments and Controls Getting to Know Your Vehicle tinue on its journey but additional driv- ing caution must be observed. The fault should be fixed at the earliest opportu- nity. Illumination of any green or blue warn- ing light indicates that a unit/system is operational. WARNING! Do not ignore a warning light or buzzer. These signals may tell you something is wrong with your vehicle. It could be a failure in an important sys- tem, such as the brakes, which could lead to an acci- dent. Have the appropriate system checked immedi- ately. Green Or Blue All warning lights are color coded to indicate the level of their importance.
The color codes and the required driver's response are as follows: Illumination of any red warning light during normal driving conditions indi- cates a major system or equipment malfunction. In the event of any red warning light illuminating, the vehicle must be stopped and the engine switched off. Do not attempt to drive the vehicle until the fault has been fixed. Illumination of any amber warning light during normal driving conditions indi- cates an equipment/system malfunc- tion. In the event of an amber warning light illuminating, the vehicle may con- Warning Lights Red Amber cigarette lighter socket it is essential to ensure that:
only 12 volt (negative ground) elec- trical equipment is connected to the cigarette lighter power socket. the power consumption of any elec- trical component does not exceed 10 amps . The instruments and controls are located on the instrument panel, center console, center roof console, and steer- ing column. Instruments and Controls General