Instruments and Controls Getting to Know Your Vehicle This warning light will illuminate and a warning buzzer will sound if the cab is not correctly locked in the down posi- tion; this warning light is only operative while the ignition is switched on. Also see the “Cab” section of this handbook. Do not attempt to drive the vehicle while this warning light is illuminated. This warning light will illuminate and a warning buzzer will sound when the engine oil pressure is too low. In the event of the oil pressure warning light illuminating during normal driving con- ditions, the vehicle must be stopped and the engine switched off.
Do not attempt to re-start the engine until the fault has been rectified. 8. Oil Pressure Warning Light 7. Cab-lock Warning Light This warning light will illuminate when- ever the headlights are in the high beam position or when the headlight flash is operated. This warning light will flash simulta- neously in conjunction with both direc- tion indicators whenever the hazard warning light switch is activated. 5. Turn Signal Warning Light - Vehi- cle This warning light flashes in conjunction with the vehicle turn signals. This warning light will illuminate when- ever the cruise control is switched ON. 4. Hazard Switch Warning Light 6. Cruise Control Warning Light 3.
High Beam Warning Light White field: low-idling speed Green Field: economical speed range Yellow field: maximum power range Red field: excessive/overspeed range (not permitted) (A PTO is not available from the fac- tory.) This warning light will illuminate whenever the PTO is engaged. Do not drive vehicle at highway speeds if PTO is engaged (light is ON). Switches, Gauges, and Warning Lights on the Instrument Panel 2. PTO Warning Light 1. Tachometer