Instruments and Controls Getting to Know Your Vehicle for selecting air temperature, and with optional air conditioning, a push button switch for turning the air conditioning on or off. 22. Ventilation Fan Indicator Light When illuminated, indicates the blower switch is on (Positions 1-3). Rotary switch (1) Controls the blower speed (3 speeds and an off position). aware of a refrigerant leak on your vehicle, have your system serviced immediately and observe the following precau- tions: Stay away from the hot engine until the exhaust manifold has cooled. Do not permit any open flame in the area. Even a match or a cigarette lighter may generate a hazardous quantity of poisonous gas.
Do not smoke in the area. Inhaling gaseous refrigerant through a cigarette may cause violent illness. The heating and air conditioner controls are located on the instrument panel. The heater and air conditioner controls consist of a rotary switch for regulating the blower speed, a slide control for selecting air distribution, a slide control accident. For clear visibility and safe driving it is extremely important for you to follow the instructions on the use of the ventilation/heating and defogging/defrosting system. If in doubt, consult your dealer. Maxi- mum heating output and fast defrosting can be obtained only after the engine has reached operating temperature. WARNING!
Excessive heat may cause the pressurized components of the air condi- tioning system to explode. Never weld, solder, steam clean, or use a blow torch near any part of the air con- ditioning system. If a refrigerant leak develops in the presence of excessive heat or an open flame, hazardous gases may be generated. These gases may cause unconscious- ness or death. If you become