Instruments and Controls Getting to Know Your Vehicle Position J: position for switching between low beam or high beam. The lever always returns to position H when it is released. The lane-change mode of the turn sig- nals is operated by keeping the lever pushed in against spring pressure. The turn signals work only with the ignition switched on. Position L: turn signals, left Position H: rest position Position R: turn signals, right The horn works when button K is pushed in against spring pressure. Turn Signals Horn Headlight flash, low beam, high beam Position H: rest position. Position I: lift against spring pressure = headlight flash. Multi-function Switch, Left WARNING!
Do not adjust the steering column while the vehicle is in motion, it could cause loss of control. You would not be able to steer properly and could have an accident. Make all adjust- ments to the steering col- umn while the vehicle is stopped. Loosen the locking control and move the steering wheel forward or rearward to the required position; ensure that the locking control is tightened and that the steering column is locked in position before attempting to drive the vehicle. Adjustable Steering Column