3. Loosen the adjusting screw retainer bolt (1), but do not remove. 1 2 4. Loosen the jam nut (3). 5. Loosen the tensioning bolt (4). 6. Pivot the compressor to slacken the belt. 7. Remove the compressor belt (5). 5 4 3 EMERGENCY REPAIRS All engines are equipped with an auto- matic drive belt tensioner and, there- fore, cannot be manually adjusted. In the event of incorrect drive belt tension, consult your dealer at the earliest opportunity. Replacing The Compressor Belt (A/C and Compressor is optional) IMPORTANT: Always install the correct replacement drive belt. 1. Disconnect the batteries, nega- tive terminal first, then positive terminal . 2. Fully tilt the cab.
Drive belt tension All vehicles are equipped with an exten- sion handle for tilting the cab. It is secured within the passenger’s seat stowage compartment (twin seat) or, alternatively, secured behind the pas- senger’s seat (single seat). IMPORTANT: Always install the correct replacement drive belt. Refer to the engine manufacturer’s Operation and Maintenance Manual. Replacing The Drive Belt Emergency repairs Vehicle Tool Kit 4 3 2 5 2