Komatsu — 10 Structure and function

STRUCTURE AND FUNCTION TRACK SHOE TRACK SHOE STANDARD SHOE SELECTION OF TRACK SHOE Select the most suitable track shoe from the following table # Categories " B " and " C " are wide shoes, so there are restrictions on their use. Therefore, before using, check the restrictions and con- sider carefully the conditions of use before rec- ommending a suitable shoe width. If necessary, give the customer guidance in their use. # When selecting the shoe width, select the nar- rowest shoe possible within the range that will give no problem with flotation and ground pres- sure.

If a wider shoe than necessary is used, there will be a large load on the shoe, and this may lead to bending of the shoe, cracking of the links, breakage of the pins, loosening of the shoe bolts, or other problems. 10-8-2 Model Item PC130-6K PC150LGP-6K Shoe width (triple shoe) 500 mm 800 mm Link pitch 175.25 mm 190 mm No. of rollers (each side) 42 45 Model PC130-6K PC150LGP-6K Specification Category Specification Category Standard 500 mm triple A 800 mm triple C Option 600 mm triple B 900 mm triple C Option 700 mm triple C Use Rocky ground, normal river soil B Normal soil, soft land • Cannot be used on rough ground where there are large obstacles such as boulders and fallen trees.

• Travel in Hi speed only on flat ground; when it is impossible to avoid traveling over obstacles, lower the travel speed to approx. half of Lo speed. C Extremely soft ground (swampy ground) • Use only for ground where "A" and "B" sink and are impossible to use. • Cannot be used on rough ground where ther are large obstacles such as boulders and fallen trees. • Travel in Hi speed only on flat ground; when it is impossible to avoid traveling over obstacles, lower the travel speed to approx. half of Lo speed.