Komatsu — 40 Maintenance Standard

MAINTENANCE STANDARD TRACK ROLLER TRACK ROLLER PC130-6K Unit: mm SM rev. PC130/150LGP-6K 40-19 40-11 No.

Check item Criteria Remedy 1 Outside diameter of flange Standard size Repair limit Rebuild or replace 158 148 2 Outside diameter of tread 130 125 3 Width of tread 35 30.5 4 Width of flange 26.5 — 5 Clearance between shaft and bushing Standard size Tolerance Standard clearance Clearance limit Replace bushing Shaft Hole 50 –0.250 –0.270 +0.187 -0.025 0.225 – 0.457 1.5 6 Interference between roller and bearing Standard size Tolerance Standard interference Interference limit Shaft Hole 57 +0.190 +0.110 +0.009 +0.060 0.020 – 0.130 — 7 Side clearance of idler (both sides) Standard clearance Clearance limit Replace 0.31 – 0.69 1.5