. OPERATION EXPLANATION OF COMPONENTS OPERATION EXPLANATION OF COMPONENTS display "TEL". 1. It will 4. Up to 12 digits can be displayed for the telephone number. 3 - 27 5. Press the () of machine mo nitor mode selector switch 1. It e diagram on the right. d [Item to be reset] in turn. ment time, press (>) or ( will change to the display in th The top line shows [Reset] an 6. When resetting the replace machine monitor mode select "YES", then press () of m switch 1. It will reset and retu achine monitor mode selector rned to the previous screen. r with "NO", then press () of or switch 1. To abandon, align the curso machine monitor mode select 7.
When resetting the replacem ent time for another item, carry out the procedur e from Step 4. After completing, press () of machine monitor mode selector switch 1 twice or turn th e startin g switch OFF. INPUT METHOD FOR TELEPHONE When an error for action code "E 03" occurs, it is possible to display the telephon 1. Press the () of machine mo nitor mode selector switch 1 and displa y the rev erse travel odometer 2. Press (>) or ( nitor mode selector switch 2 and 3. change to the display in the d Once the telephone number i displayed next time. s input, the input number will be Input from the first digits. The cursor is displayed at the i nput position.
Press (>) or ( machine monitor mode select To leave a blank, select "*". When the input value is decide d, press () of machine monitor mode selector switch 1. Th position. 5. Repeat the procedure in Step 4 until the last digit. At the last digit, pre ss () o f machine monit or mode se lector switch 1 to return to the previ ous screen. If there is a mistake in the inpu t or the input is to be stopped, press () of mach ine monitor mod e selector s witch 1 to return to the previous scr een. 6. When completing the operatio n, press () of machine monitor mode selector switch 2 twice o r turn the st arting switch OFF.