Cummins — TURBOCHARGER - INSTALLATION

Engine Assembly (00-02) Turbocharger - Installation N14 Page 0-145 Tighten the capscrews in two steps in the sequence shown. Torque Values: Step 1 47 [35 ft-lb] Step 2 81 [60 ft-lb] Turbocharger - Installation Apply a film of high temperature anti-seize compound, Part No. 3823097, to the turbocharger mounting studs. Install a new mounting gasket, the turbocharger, and the four mounting nuts. Tighten the mounting nuts. Torque Value: 68 [50 ft-lb] Install a new o-ring seal, the clamp, and the discharge elbow to the turbocharger. Tighten the clamps. Torque Value: 8.5 [75 in-lb]