Cummins — CYLINDER HEAD CAPSCREW HOLES - REPAIRING

Cylinder Block - Machining (01-03) Cylinder Block N14 Page 1-26 Cylinder Head Capscrew Holes - Repairing Components included in the capscrew thread repair kit, Part No. 3376208, for the N14 block are as follows: Ref. No. Tool No. Description 2 3376008 Insert 3 3376006 Reamer 4 3376007 Tap 5 ST-1272-5 Locator 6 ST-1272-11 Chip Removal Unit 7 ST-1272-13 Loctite T Primer-T 8 ST-1272-12 or 3823718 Retaining Compound 9 ST-1272-9 Stop Collar Remove any burrs from the top deck surface of the cyl- inder block. A flat mill file is very effective for this process. Burr removal is necessary so that you can get an accurate fixture location. Align the fixture with the failed capscrew hole.

Install the reamer base plate and the guide bar to the cylinder block. Position the guide bar over the capscrew hole to be re- paired. Using a tapered locator, center the guide bar and the bushing over the capscrew hole. Tighten the guide bar and bushing assembly. Remove the tapered locator.