Cummins — CAM FOLLOWER ASSEMBLY - GENERAL INFORMATION

Cam Follower Assembly - General Information Cam Follower Assembly N14 Page 4-4 Cam Follower Assembly - General Information The cam follower group consists of the injector cam followers, valve cam followers, cam follower shafts, cam follower housing, and the valve and injector push rods. The N14 uses the crowned roller design cam follower. This design has been used since November, 1982. NOTE: Label or tag all of the cam follower parts with the position of the housing on the engine and their relative position to the other parts as they are removed from the housing.

Many of the cam follower parts are interchangeable; however, due to wear patterns, they must be installed in the same position from which they were removed.