Fuel System Fuel Pump - Cleaning and Inspection for Reuse (05-01) N14 Page 5-3 Fuel Pump - Cleaning and Inspection for Reuse (05-01) When removing the fuel pump from step timing control (STC) engines, check to make sure the same Control Parts List (CPL) number is on both the fuel pump dataplate and the engine dataplate. If the CPL number on the fuel pump dataplate does not match the CPL number on the engine dataplate, the fuel pump must be calibrated again to the correct specifica- tion for the engine. Cleaning - PT Fuel Pump Install plastic cup plugs or tape on all openings of the fuel pump to prevent dirt or cleaning solvent from entering the pump.
Remove the gasket material from the front cover gasket sealing surface. Caution: Use a cleaning solvent approved for cleaning aluminum to prevent damage to the fuel pump. Use a brush and solvent to clean the fuel pump exterior. Dry with compressed air.