Cummins — INSPECTION

Lubricating Oil System Lubricating Oil Cooler Assembly - Rebuild (07-11) N14 Page 7-31 Remove Compuchek T fittings and straight thread o-ring plugs from the transfer housing and support. Remove the transfer housing support bracket. Cleaning Clean the gasket material from the oil cooler core, trans- fer housing, support, spacer plate and filter head. After removing the gasket material, clean with solvent; and dry with compressed air. Clean the filter head and shutoff valve with solvent. Dry with compressed air. Inspection Inspect the filter head and shutoff valve for cracks, pit- ting, corrosion, or other damage. Replace if damage is found.