Cummins — AIR COMPRESSOR

General Information Air Equipment N14 Page 12-2 Air Equipment - General Information Air Compressor The air equipment group consists of Cummins single and two-cylinder air compressors, compressor check valves, and air and coolant piping. It also includes air activated cranking motors. The air compressor is lubricated by engine lubricating oil which enters the compressor through a drilling in the support. The oil lubricates the connecting rod bearings and the crankshaft. The oil then flows to the air compressor crankcase and returns to the engine through a drain passage located in the support. The air compressor is cooled by the engine coolant.

Only the cylinder head is cooled on the single cylinder air compressor. Both the cylinder head and cylinders are cooled on the two-cylinder air compressor. Service information, specifications, and repair of Cummins air compressors are contained in the following publications: Single cylinder air compressor - Air Equipment Rebuild Manual, Bulletin No. 3810242 Two-cylinder air compressor - Air Equipment Rebuild Manual, Bulletin No. 3810257 Instructions for testing and repairing air cranking motors and air compressors not manufactured by Cummins can be obtained from the original equipment manufacturers.

The following list contains the addresses of suppliers of air equipment for use on Cummins engines: U.S.A. Canada Bendix H.V.S.G. 901 Cleveland St. Elyria, OH 44036 Attention: Technical Services Dept. Bendix H.V.S.G. P.O. Box 5712 1005 Wilton Grove Rd. London Ontario, Canada N6A4S8 Attention: Technical Services Dept. Engine Starting Systems Allen and Martinsville Rd. P.O. Box 1776 Liberty Corner, NJ 07938 International Midland Brake, Inc. 490 South Chestnut St. Owosso, MI 48867 Bendix H.V.S.G. Europe Ltd. 66 Grosvenor St. London, England W1X90B Attention: Technical Services Dept.