Cummins — INSPECTION

Air Compressor - Cleaning and Inspection for Reuse (12-01) Air Equipment N14 Page 12-4 Visually inspect the compressor drive gear and the fuel pump hub-type drive coupling for wear or damage. Measure the single cylinder air compressor crankshaft end clearance. Crankshaft End Clearance mm in. 0.06 MIN 0.002 0.69 MAX 0.027 Measure the two-cylinder air compressor crankshaft end clearance. Crankshaft End Clearance mm in. 0.05 MIN 0.002 0.28 MAX 0.011 NOTE: If cracked or damaged parts are found or the end clearance exceeds the limits specified, the air compressor must be rebuilt or replaced. Refer to Air Equipment Rebuild Manual, Bulletin No. 3810242, for single cylinder, or Bulletin No.

3810257, for two-cylinder air compressor rebuild instructions.