Engine Testing Definition of Terms On Engine Performance Curve N14 Page 14-3 Definition of Terms On Engine Performance Curve Cummins 1991 N14 Heavy Duty Engine Operating Curve Definitions: 1. Peak Torque (N•m [ft-lb]) - Maximum torque that the engine will produce. Also, sometimes referred to as COMMAND TORQUE. This is listed on the engine data plate. 2. Peak Torque RPM (RPM) - Engine speed at which peak torque is generated. This is listed on the engine data plate. 3. Maximum HP RPM (RPM) - Engine speed at which maximum power is developed. This is listed with Advertised Horsepower on the engine data plate. 4. Advertised Horsepower (HP) - Maximum power that the engine will develop.
This is provided on the engine data plate with its corresponding engine speed. 5. Command Range (RPM) - The engine’s operating range from COMMAND TORQUE or Peak Torque up to the engine’s governed speed. Fig. 1 6. COMMAND Point - The point on the per- formance curve where maximum horse- power and optimum fuel economy come to- gether. This is the point where Advertised Horsepower occurs. 7. Full Load Governed Speed (RPM) - De- fined as the upper end of the engine’s full load operating range. This is listed on the engine data plate. 8. No-Load Governed Speed (RPM) - (not shown) Maximum unloaded engine speed. This value is listed on the engine data sheet and in the FPEPS publications. Fig. 2