Engine Disassembly (00-01) Accessory Drive - Removal N14 Page 0-31 Accessory Drive - Removal Caution: If the accessory drive dowel pin has been in- correctly installed in the accessory drive shaft, the dowel pin must be removed before attempting to remove the accessory drive to prevent damage to the accessory drive bushing. Remove the five capscrews and the accessory drive assembly. Fuel Tubing - Removal Remove the retaining clamps and the fuel rail supply tube from the engine. Remove the fuel return tube from the engine. Remove the fuel fittings from the rear of the cylinder head. CELECT™Engine Position Sensor (EPS) - Removal Disconnect the sensor from the sensor harness.
Turn the EPS out of the cylinder block. Use service tool, Part No. 3822747. Lubricating Oil Transfer Tube - Removal Remove the two capscrews from the flange at the oil pan and also the two capscrews from the flange at the lubri- cating oil pump. Remove the lubricating oil transfer tube.