Specifications Engine Assembly - Capscrew Torque Values NT 855 Page 18-19 Torque Values Part or Assembly Step ft-lb Big Cam IV/New Big Cam IV 20 15 88 Big Cam IV 16 12 Note: Tighten in the sequence shown. Rocker Housing Covers Oil Pan (7/16-inch Mounting Capscrews) 20 15 Note: Tighten one of the 7/16-inch oil pan mounting capscrews on each side of the oil pan, halfway between the front and the rear of the oil pan. Oil Pan Four 5/16-inch capscrews in rear of 25 20 the oil pan. Thirty-two 7/16-inch capscrews 70 50 Note: Tighten in the sequence shown. Lubricating Oil Transfer Tube First, tighten the two capscrews (1) at the oil pan.
45 35 Second, tighten the capscrews (2) at the lubricating oil pump. 45 35 DFC Signal Line Tube Nuts 15 120 in-lb Aftercooler Big Cam IV Unitized Aftercooler 70 50 Note: Tighten the nine capscrews in the sequence shown. Use only grade 8 capscrews. Air Compressor 65 50