Cummins — CAPACITIES

Lubricating Oil Pump - Inspection Specifications Specifications Page 18-54 NT 855 Part or Assembly Ref. Point mm in Lubricating Oil Pump Body and Cover Bushing Bore I.D. 25.387 MIN 0.9995 25.413 MAX 1.0005 Bushing I.D. (New) 22.28 MIN 0.877 22.30 MAX 0.878 Driven Gear Bushing Bore I.D. 25.387 MIN 0.9995 25.413 MAX 1.0005 Note: If the bushing bore inside diameter is not within specifications, the gear must be replaced. Bushing I.D. (New) 22.28 MIN 0.877 22.30 MAX 0.878 Drive Gear Bore I.D. 22.187 MIN 0.8735 22.200 MAX 0.8740 Note: If the bore inside diameter is not within specifications, the gear must be replaced. Drive Shaft O.D. 22.20 MIN 0.874 22.22 MAX 0.875 Note:

Shafts that are damaged or worn smaller than the minimum given must be replaced. Driven Shaft Bore I.D. 22.263 MIN 0.8765 22.289 MAX 0.8775 Note: If the shaft bore diameter is not within specifications, the pump body must be replaced.