Anti-pinch function During the opening and closing process of the trunk, if there is an obstacle, the trunk lid will move reversely, and during the movement, if the obstacle comes again, the trunk lid will stop moving. Function setting The trunk lid electric opening, key sensing, and light alarm function opening/closing can be set through the center control display. Fault prompt When the keyless start/stop button is in "RUN" mode and the gear is not in P, pressing the ON switch on the trunk lid will prevent the trunk lid from opening and the instrument cluster will display "Please shift to P".
Cargo loading Open the trunk with smart key After entering the sensing area, the high-level brake lamp lights up to indicate successful entry. Door and window Common Door Window Power liftgate Exterior rearview To improve the accuracy and sensitivity of sensing, the key needs to be placed near the waist and below. Set the trunk height* Use the inner switch setting Light Electric function of electric liftgate Liftgate height Vehicle sound effect Driving Driver assistance Light flashing alarm Buzzer alarm Instrument cluster and HUD Through the center control display, you can turn on/off the POT sensing on function, and set the mode.
When mode 1 is started, carry the smart key into the trunk lid 0.5 m sensing area, then exit this area, and enter the sensing area again. Then, the POT will be turned on automatically. After the vehicle is started, the trunk lid cannot be turned on/off by the switch when it is not in P gear. When the trunk is opening/closing, press and hold the OFF switch on the trunk lid for 3 seconds, and then the current height is set successfully. It should be completed within 10 seconds from the first to the second entry. When mode 2 is enabled, carry the smart key into the 0.5 m sensing area of the truck lid and stand in situ for more than 6 s. The POT will be activated automatically.
26 Electric liftgate intelligent entry OFF Mode 2