Specification and capacity of oil/fluid Technical parameters Note: 1. The above capacity is approximate, and the actual usage will vary slightly; 2. Unless otherwise specified, the capacity of this meter is the design value, and the manufacturer has the right to adjust the actual amount according to the changes of products, equipment and climate; 3. This table oil maintenance filling amount is the recommended value, the specific filling amount should be judged according to the oil ruler; 4. The specific filling brake fluid model shall be consistent with the brake tank cap mark. It is forbidden to mix different brake fluid together.
263 Oil/fluid name Specification Vehicle filling volume Oil SP/C50 W/20, oil ash weight ratio ≤0.8% 4.7 L (maintenance refill volume) Automatic transmission lubricating oil CNPC Kunlun DCTF-7S 4.95~5.05L Coolant Total organic coolant (freezing point ≤ -40 °C) 6.98~7.02L Windshield washer fluid Water-based low temperature windshield cleaning fluid (freezing point ≤ -35 °C) 1.5L (volume 3L) Brake fluid DOT4 0.77~0.83L A/C refrigerant HFC-134a 530~550 g