CAB AND FRAME 2-17 Front Step (NPS Front Rigid Suspension Model) Component N0A0224E Legend 1. Headlamp lower cover 5. Lower step rod 2. Front door check arm pin 6. Front step assembly 3. Clip 7. Step plate 4. Lower step plate assembly Removal Expand the notch on the tip of pin to remove, and tap the pin from the bottom with a plastic hammer. 6. Front step assembly 1. Lower step plate Remove the 5 mounting bolts. 2. Lower step rod Remove the 2 mounting nuts. 3. Headlamp lower cover Remove the 3 mounting bolts, 2 screws and a clip. 7. Step plate Pull the mating part of clip to remove it. 4. Front combination lamp 5. Front door check arm pin Remove 5 mounting bolts.