CAB AND FRAME 2-3 N2A0008E N2A0009E 4. Fog lamp assembly Remove the fixing nuts and pull out the fog lamp (1) to forward from reinforcement (2). Installation For installation, reverse the removal procedure taking the following points into consideration. 1. Tighten the front bumper assembly fixing bolts to the specified tightening torque. Tighten: 40 N m (4.1 kg m/29.5 lb ft) 2. Adjust the installation position referring to “Basic sizes for installation of the front bumper”. Front Bumper (NPS Rigid Axle Model) N2A0010E