CAB AND FRAME 2-35 Rear Door Trim Pad N2A0190E Legend 1. Inside lever bezel 3. Arm rest assembly 2. Window regulator handle 4. Rear door trim pad Removal 1. Inside lever bezel Remove the mounting screws and draw out the bezel forward by pulling the inside lever. 2. Window regulator handle Draw out the hook and dismount the handle. 3. Arm rest assembly Remove the 2 mounting screws. 4. Rear door trim pad Remove the clip fitting at 9 positions. N2A0064E Installation For installation, reverse the removal procedure taking the following points into consideration.