hitachi — Fuel system check

1E-158 Electronic control fuel injection system (Common rail type) Step Action Value YES NO 1 Check the fuel quality. 1. Drain fuel from the fuel tank. 2. Add proper fuel. 3. Bleed air from the fuel. 4. Start the engine. Does the engine start? — Go to Step 6. Go to Step 2. 2 Check the fuel quantity. Is sufficient amount of fuel supplied? — Go to Step 3. Supply fuel, and Go to Step 3. 3 Check if there are additional filters or parts, other than genuine fuel filter, pre-filter and electromagnetic pump, in the machine’s fuel pipe. Are there any additional filters or parts? — Go to Step 4. Go to Step 5. 4 1. Remove the additional filter and bleed air.

• If the fuel resistance is increased, the DTC P1093 or 1094 may be detected. 2. Start the engine. Does the engine start? — Go to Step 6. Go to Step 5. 5 1. Check for excessive dirt or clogging in the (main and pre-) fuel filters. 2. Check for excessive dirt or clogging in the electromagnetic pump (main and pre-) filter. 3. If the trouble is detected, clean or replace. 4. If air is entered in the main filter, examine the cause and repair. Is the procedure completed? — Go to Step 6. — 6 1. Check for damage, clogging, or improper connection in the fuel pipe. 2. If the trouble is detected, repair as required. Is the procedure completed? — Go to Step 7. — 7 1.

Check for following troubles in the fuel tank. • Foreign matter mixed in the fuel • Disconnection or damage in fuel supply pipe • Crush or damage in tank • Wrong assembly of fuel pipe • Clogging at filler neck • Water mixed in fuel 2. If the trouble is detected, repair as required. Is the procedure completed? — Go to Step 8. —