hitachi — DTC: P0113 (Flash code 22) Intake air temperature sensor fault (high voltage fault, open circuit or short to power supply circuit)

1E-224 Electronic control fuel injection system (Common rail type) DTC:

P0113 (Flash code 22) Intake air temperature sensor fault (high voltage fault, open circuit or short to power supply circuit) A A Engine control module (ECM) CAN HIGH CAN LOW 37 E-57 18 E-57 60 E-57 20 E-57 41 E-57 63 E-57 42 E-57 64 E-57 61 E-57 71 E-57 72 E-57 Machine control unit CAN HIGH CAN LOW 6 FL-167 5 FL-167 4 FL-167 6 FL-167 5 FL-167 4 FL-167 1 FL-269 2 FL-269 3 FL-269 2 FB-124 1 FB-124 Intake air temperature sensor Barometric pressure sensor Accelerator position sensor TSWG0081 Description of circuit Preconditions when DTC is set The intake air temperature (IAT) sensor is the thermistor type and the value of resistance changes according to the temperature.

The resistance is low when the intake air temperature is high, and is high when the temperature is low. The ECM energizes 5 V to the IAT sensor through the pull up resistance, and calculate the intake air temperature from the change in voltage, to utilize various control such as fuel injection control. If the resistance is low (temperature is high), the voltage becomes low; if the resistance is high (temperature is low), the voltage becomes high. Key switch input voltage is 16V or more. DTC P1630 or P1632 is not detected. 3 minutes or more has elapsed after starting engine. DTC set condition IAT sensor voltage is 4.95V or more.

Action taken when DTC is set Trouble is displayed on the monitor of the machine or diagnosis lamp comes on. Main trouble symptom White smoke emission possible when starting at low temperatures Accelerator Accelerator position position sensor 1 signal sensor 2 signal 5V Intake air Barometric pressure temperature sensor signal sensor signal 5V Vcc