hitachi — DTC: P0118 (Flash code 23) Engine coolant temperature sensor input is high (open circuit or short to power supply)

Electronic control fuel injection system (Common rail type) 1E-243 About ECT sensor Characteristics of ECT sensor The output voltage of ECT sensor changes according to the engine coolant temperature. The scan tool with CAN communication displays a fixed value when the value exceeds the threshold voltage. Therefore, judge as it is more than the threshold value if the value of 40 ° C ( 40 ° F) or 120 ° C (248 ° F) is not changed. When error occurs, error value (214 ° C {419 ° F}) is displayed. The following illustration shows the correlation between physical value and voltage displayed in the scan tools with CAN communication.

Tech2 and scan tools with KW communication can display both physical value and voltage. 1 2 3 1 2 3 (V) TSWG0061 4.7441 Name 1. Sensor GND (for engine control) 2. Sensor signal (for engine control) 3. Sensor signal (for meter) 0.2129 -40 (-40) 120 (248) F TSWG0181 Step Action Value YES NO 19 1. Check for followings in the ground circuit between ECM and ECT sensor using breaker box or DMM. Refer to “Breaker box inspection procedure”. Note: If breaker box is not available, refer to “On- board check procedure for sensors”. • Open circuit • High resistance 2. If the trouble is detected, repair or replace as required. Is the trouble detected? — Go to Step 13. Go to Step 9.